詳細情報

この商品について

• NGW-1pc Thermal resistance transfer to voltage PT100 Turn to 0-5V 0-10V Linear conversion pt100 Temperature transmitter module

PT100 transfer voltage module This is a linear conversion module that converts the input resistance signal into a temperature (voltage signal) output via internal chip processing. There are two output voltage range options. Module parameters 1, the working voltage: 9V ~ 24V 2, the input resistance: Pt100 thermal resistance 3, the output voltage: 0.00V ~ 5.00V/0.00V ~ 10.00V 4, temperature range: -100 ~ +500 (degrees). 5. Output mode: S2 pad on the circuit board: open circuit (output 0.00V ~ 5.00V); short circuit (output 0.00V ~ 10.00V), the default is open circuit. S1 and J1 pads are not used. 6, the scope of application: remote data acquisition and control equipment; 7. Size: (long) 26mm * (width) 23mm * (high) 10mm 8, module interface: 24V: Positive power connector (9V to 24V). G: Power ground connector. IN: Thermal resistance positive interface. G: Thermal resistance negative interface. OUT: Signal output interface (0.00V to 5.00V/0.00V to 10.00V). G: Power ground connector. Note: When the output is from 0.00V to 10.00V, the power supply voltage must be supplied with 15V. Output (0.00V to 5.00V) Resolution: 0.0083333V/°C (Volts/Celsius) Output (0.00V to 10.00V) Resolution: 0.0166666V/°C (Volts/Celsius) Calculate the measured temperature equation: (output voltage (V)/resolution) -100°C = measured temperature (°C).