錆取り用ヒーター 2500W Induction Heater High Frequency Induction Heating Machine Metal Smelting Furnace+power Supply

Please read the item description carefully as the item photos may not match the actual product. View original page

LAVINI(ラビーニ)

Translate

産業・研究開発用品エレクトロニクス部品受動部品インダクタ・コイル

Price

¥ 59,112

Quantity

Japan Domestic Shipping

¥ 0

Estimated delivery time

3月16日-22日にお届け

Int'l Shipping Fee

Apply after arriving at the Doorzo warehouse

Seller

shenjingshangmaaa

(3)

Sale

3.01-3.04, Surugaya + Amiami 5% off! 3.01-3.03, Mercari ¥500+¥1,100+¥2,500 OFF！ 3.01-3.31, One "0 Proxy Fee" coupon daily!

詳細情報

ブランド	‎LAVINI(ラビーニ)
製品型番	‎1005006398427587
梱包サイズ	‎3 x 2 x 1 cm; 10 g
色	‎One Color
入数	‎1
商品の重量	‎10 g

この商品について

1. It adopts integrated assembly design, integrated heat dissipation, water cooling, overcurrent
protection and power detection. It is easy to use and requires no extra wiring. It only needs to be
connected to the power supply.
2. Real-time digital power meter displays parameters such as voltage, current and power to
prevent overload
3, 1.8KW (2 90*90 cooling fans at the bottom, ),2.5kw( 2 120*1200 cooling fans at the bottom,)
excellent heat dissipation effect
4, the top design has a handle, easy to carry and move

2500W Induction Heater High Frequency Induction Heating Machine Metal Smelting Furnace Welding Metal Quenching Equipment
Parameter:
the maximum working voltage: 48V
the maximum working current: 50A
the maximum working power: 2500W
the size:44mm*170mm*95mm
matching copper tube size: 60mm*10circle

Package:
Integrated induction heating machine*1
Copper tube*1
power supply*1
(This power supply is disassembled second-hand communication power supply)
the use of precautions:
1. No matter in any case, no-load is allowed (no-load refers to the output port without
any load).Once the power is turned on, the board will emit high-frequency noise, which
will cause the MOS tube to be completely damaged and cannot be repaired.
2. It must be noted when using a switching power supply, because a high-power
switching power supply generally has a slow-start function, that is, it slowly rises at the
beginning of the output voltage, and if the voltage is turned up to 11V, the induction
heating circuit is turned on because the voltage is insufficient. The circuit does not
vibrate, so that the two MOS tubes are turned on at the same time to burn the
components, so be sure to energize the external power supply before pushing the air
switch on the right side of the power meter on the main unit.
3. This circuit has strict requirements on power supply. The 12V power supply must use
more than 500W power supply, 24V is greater than 1200W, 36V is greater than 2000W,
and 48V is greater than 2600W (recommended working voltage is 48V);
4. No matter the voltage is used, as long as the operating current is lower than 50A, the
circuit will not be burned out. Therefore, a 50A fuse can be added to protect the circuit
during high-power operation.
5. The working voltage must not be lower than 12V.
6. The input power supply is recommended to be DC48V50A. Do not use AC power!!!
7. S

Translate