Can avoid the risk of burning the mosfet or the 5v regulator at the moment of power onWith this Capacitor , we can use 3S 300~350mah Crazybee F4 PRO V2.0 and Crazybee F4 PRO V2.1 , and 2s 300~350mah Crazybee F4 PRO V1.0And if you want to use the above 350mah , we recommend use 220 uF or above capacitor.We found most of the 5v regulator and esc of the Crazybee F4 flight controller burnt after mod the PH2.0 to XT30 .Also, more powerful the is(lower esr than stock ) , more possibility to fail. And, the temporary solution is add a low esr capacitor onto xt30 connector. This capacitor should have a esr less than 0.2 ohm and have a capacitance more than 100uF. Rubycon ZLG/For ZLH series and Samyoung NXB series are what we have tested and recommended.Made of high-quality plastic, and less burrs and good texture.Tested in good condition,100% working!商品の説明 XT30 Plug Pigtail Power Wire 100F Capacitor Mobula7 HD TRASHCAN UR85 UR85HD Crazybee F3 / F4 PRO PartsWire length: 70mm(exclude XT30)Height: 2.6gramCrazybee F3 / F4 PRO series flight controllerThe pictures show what happened after plug in :The max voltage is 19v and the voltage spike lasted about 5us.After add a 100uF/16v ( NXB16VB100M5*11_LO) capacitor, we obtained a much slower and smaller spike:Without 100uF, the max spike voltage increase to ~25v while with 100uF it decrease to about 20v, which is acceptable to Crazybee F4 PRO V2.0 and Crazybee F4 PRO V2.11PCS/2PCS x XT30 Plug Pigtail Power Wire with 100F Capacitor

商品の情報

カラー : ‎1pcsブランド名 : ‎CKSEKDメーカー : ‎CKSEKD商品の重量 : ‎1 g商品重量 : ‎1 グラム製造元リファレンス : Shine-Tron 0521ASIN : B0CDVFD4D9Amazon.co.jp での取り扱い開始日 : 2023/8/2ブランド : CKSEKD色 : 1pcsユニット数 : 1.0 Count商品の重量 : 1 グラム商品の個数 : 1