コンソール |
U-Boot 2009.06 (Apr 08 2015 - 07:10:33)
CPU: 8548, Version: 3.1, (0x80310031)
Core: E500, Version: 2.2, (0x80210022)
Clock Configuration:
CPU0:1400 MHz,
CCB:400 MHz,
DDR:200 MHz (400 MT/s data rate), LBC:25 MHz
L1: D-cache 32 kB enabled
I-cache 32 kB enabled
I2C: ready
DRAM: 1 GB
Memory Test ..........
Production Mode
Platform: Rack Switch G8124-E (version 0.0.0.25)
FLASH: 64 MB
L2: 512 KB enabled
Net: eTSEC1, eTSEC3
Booting OS
Sat Jan 1 01:15:38 UTC 2000
Booting image '1'
Initializing Production Mode ....
64MB w/512-128KB sectors
Waiting for switch Insert event.....
Rebooted because of power cycle.
.
Booting complete 1:16:03 Sun Jan 1, 2000:
Version 8.3.2 from FLASH image1, factory default configuration.
Lenovo RackSwitch G8124-E.
Enter password:
Jan 1 1:16:03 192.168.49.50 INFO system: booted version 8.3.2 from FLASH image1, factory default configuration
Jan 1 1:16:03 192.168.49.50 INFO system: Assigned default IP 192.168.49.50 to data interface
Jan 1 1:16:03 192.168.49.50 INFO system: Assigned default IP 192.168.50.50 to mgta interface
Jan 1 1:16:03 192.168.49.50 INFO system: Assigned default IP 192.168.51.50 to mgtb interface
Jan 1 1:16:03 192.168.49.50 NOTICE mgmt: Booting up with compatibility mode.
Enter password:
RS G8124-E>en
Enable privilege granted.
RS G8124-E#show system
System Information at 1:16:23 Sun Jan 1, 2000
Time zone: No timezone configured
Daylight Savings Time Status: Disabled
Lenovo RackSwitch G8124-E
Switch has been up for 0 days, 0 hours, 0 minutes and 46 seconds.
Last boot: 1:15:56 Sun Jan 1, 2000 (power cycle)
MAC address: a4:8c:db:86:5b:00 IP (If 1) address: 192.168.49.50
MGMT-A Port MAC Address: a4:8c:db:86:5b:fe
MGMT-A Port IP Address (if 127): 192.168.50.50
MGMT-B Port MAC Address: a4:8c:db:86:5b:ef
MGMT-B Port IP Address (if 128): 192.168.51.50
Hardware Revision: 0
Board Revision: 0
Switch Serial No: Y01CCM66L075
Hardware Part No: 00MY372 Spare Part No: 00MY372
Manufacturing date: 16/25
MTM Value: 7159-HC9
ESN: MM24631
Software Version 8.3.2 (FLASH image1), factory default configuration.
Boot kernel version 8.3.2
Press q to quit, any other key to continue Temperature Sensor 1: 30.5 C
Temperature Sensor 2: 27.5 C
Temperature Sensor 3: 36.00 C
Temperature Sensor 4: 43.25 C
Temperature Sensor 5: 33.25 C
Warning at 85C and Failure at 100C
Speed of Fan 1: 8557 RPM (75 PWM)
Speed of Fan 2: 8723 RPM (75 PWM)
Speed of Fan 3: 8752 RPM (75 PWM)
Speed of Fan 4: 8571 RPM (75 PWM)
Speed of Fan 5: 8653 RPM (75 PWM)
Speed of Fan 6: 8372 RPM (75 PWM)
System Fan Airflow: Rear to Front
State of Power Supply 1: On
State of Power Supply 2: On
Current idle CLI timeout: 10 minutes
System will reset on crash
System will log packets sent to the CPU
Use of BOOTP for configuration currently enabled
Use of DHCP for MGTA interface configuration currently enabled
Use of DHCP for MGTB interface configuration currently enabled
Use of default-ip for DATA interface configuration currently enabled
Use of default-ip for MGTA interface configuration currently enabled
Press q to quit, any other key to continue Use of default-ip for MGTB interface configuration currently enabled
Display hostname (sysName) in CLI prompt currently disabled
Syslog console enabled
Syslog severity level of console output 6
Syslog severity level of write to flash 7
ErrDisable recovery disabled, timeout 300 sec
Port-based Port Mirroring currently disabled
IP Forwarding currently ON
NTP currently OFF
RADIUS authentication currently OFF
TACACS+ authentication currently OFF
LDAP Authentication currently OFF
Current SNMP params:
Read community string: "public"
Write community string: "private"
SNMP state machine timeout: 5 minutes
Trap source address: 192.168.49.50
SNMP Trap source loopback interface not set
Authentication traps disabled.
All link up/down traps enabled.
Current SNMP trap hosts:
Current System Access settings:
IP Management currently allowed from *ALL* IP addresses
Press q to quit, any other key to continue SNMP access currently is allowed from *ALL* IP addresses
Usernames:
user - disabled - offline
oper - disabled - offline
admin - enabled - online 1 session.
Current User ID table:
Current strong password settings:
strong password status: disabled
HTTP access currently enabled on TCP port 80
HTTPS server access currently disabled on TCP port 443
NETCONF access currently enabled
NETCONF session timeout: 300 seconds
NETCONF via SSH currently enabled on TCP port 830
SNMP access currently read-write
User configuration from BBI currently disabled
Telnet/SSH access configuration from BBI currently disabled
Telnet access currently enabled on TCP port 23
TFTP occurs over port 69
RS G8124-E#show version
System Information at 1:16:33 Sun Jan 1, 2000
Time zone: No timezone configured
Daylight Savings Time Status: Disabled
Lenovo RackSwitch G8124-E
Switch has been up for 0 days, 0 hours, 0 minutes and 56 seconds.
Last boot: 1:15:56 Sun Jan 1, 2000 (power cycle)
MAC address: a4:8c:db:86:5b:00 IP (If 1) address: 192.168.49.50
MGMT-A Port MAC Address: a4:8c:db:86:5b:fe
MGMT-A Port IP Address (if 127): 192.168.50.50
MGMT-B Port MAC Address: a4:8c:db:86:5b:ef
MGMT-B Port IP Address (if 128): 192.168.51.50
Hardware Revision: 0
Board Revision: 0
Switch Serial No: Y01CCM66L075
Hardware Part No: 00MY372 Spare Part No: 00MY372
Manufacturing date: 16/25
MTM Value: 7159-HC9
ESN: MM24631
Software Version 8.3.2 (FLASH image1), factory default configuration.
Boot kernel version 8.3.2
Press q to quit, any other key to continue Temperature Sensor 1: 30.0 C
Temperature Sensor 2: 27.5 C
Temperature Sensor 3: 34.75 C
Temperature Sensor 4: 43.25 C
Temperature Sensor 5: 34.25 C
Warning at 85C and Failure at 100C
Speed of Fan 1: 8450 RPM (75 PWM)
Speed of Fan 2: 8626 RPM (75 PWM)
Speed of Fan 3: 8809 RPM (75 PWM)
Speed of Fan 4: 8557 RPM (75 PWM)
Speed of Fan 5: 8598 RPM (75 PWM)
Speed of Fan 6: 8194 RPM (75 PWM)
System Fan Airflow: Rear to Front
State of Power Supply 1: On
State of Power Supply 2: On
RS G8124-E#
|